Imprinted Ribbon Order Form: Personalized Ribbon By The Foot (Favor)

	Order Personalized Ribbon by the Foot

Ribbon Pricing By The Foot DynaSatin $ .27 per foot (3/8", 5/8") $ .29 per foot (7/8") Bridal Satin $ .31 per foot (3/8") $ .33 per foot (5/8") Min. Order: 100 feet Favor imprinting will imprint a name on one end and a date on the other: view example Imprinted ribbon must be ordered in a minimum of 1 roll of 100 feet. Orders over 100 feet must be made in increments of 25 feet. The actual utilization will depend on how many favors you have, and how much ribbon is used in wrapping the favor. All ribbons may be printed in any one of 22 colors from 12 standard fonts. Available in 3/8”, 5/8” and 7/8" DynaSatin; 3/8” and 5/8” Bridal Satin You will need Adobe Acrobat Reader to VIEW PDFs. To download and install Acrobat Reader, click the Adobe Acrobat icon below	Personalized Ribbon By The Foot Order Form Step 1: Select the Layout Style: Favor Continuous Step 2: Select the Ribbon Type/Width: Step 3: Select the Ribbon Color: DynaSatin Ribbon Colors (3/8" & 5/8") DynaSatin Ribbon Colors (7/8") Bridal Satin Ribbon Color: Step 4: Select the Text Font: Step 5: Select the Imprint Color: Step 6: (Optional) Add a Standard Design on 5/8" and 7/8" ribbon only Designs in the dropdown marked with an may be used on 5/8" and 7/8" ribbon only. All other designs* may be used on 5/8" and 7/8" ribbon but set up as 1 line of text only. Step 7: Enter the Text to Be Imprinted: If you selected Continuous Ribbon, enter your text here: If you selected Favor Ribbon, enter your text here: Favor Text Left: Favor Text Right: *Step 8: If you selected Favor* style, enter the finished length here: Special Instructions? Enter the number of feet(100 minimum)** (increments of 25 ft. thereafter) (ex. 125 ft)	Hint:on Color Selection When selecting the ribbon color, remember to ensure a contrast between the ribbon and the text. White text on a pink or ivory ribbon, for example, would be hardly readable.
		Hint:on Favor Ribbons You need to complete a series of Steps to order a FAVOR style ribbon. You will need to enter the text you want on the left hand side of the ribbon (usually the couple's name, bride's name first) and, on the right hand side, the date of the wedding. Do NOT expect to get more than 35 characters on the ribbon - on average - especially if the type style you select is italacized or 'scripty'. Each capital letter takes up the same space (approximately) as two lower case letters. We AUTOMATICALLY add .5 inch as the left and right margins. Hint: on Ribbon Length The Finished (cut) length of the ribbon is the total length of the ribbon you will be using to wrap your favor. Generally, ribbon lengths of 14 - 16 inches are 'usual' and will meet most needs. To determine the actual length you need, use a piece of string to 'wrap' the favor you will be using, then measure the piece of string. In the FAVOR type of ribbon, be certain when estimating the cut length to ensure that it is long enough to not only make the wrap, but is sufficiently long enough so that your text (left and right side) can be clearly seen.