Imprinted Ribbon Order Form: Personalized Ribbon By The Foot (Favor)

	Order Ribbon (Favor Style) by the Foot

Ribbon Pricing By The Foot $ .31 per foot 3/8" $ .33 per foot 5/8" Min. Order: 100 feet Favor imprinting will imprint a name on one end and a date on the other: view example Imprinted ribbon must be ordered in a minimum of 1 roll of 100 feet. Orders over 100 feet must be made in increments of 25 feet. The actual utilization will depend on how many favors you have, and how much ribbon is used in wrapping the favor. All ribbons may be printed in any one of 29 colors from 12 standard fonts. Available in 3/8” and 5/8”.	Order Form $ .31 per foot Min. Order: 100 feet Step 1: Select the Ribbon Color: View Step 2: Enter the Imprint (What you want printed) Be sure to enter both the right hand and the left hand messages in Step 2a and 2b. Step 2a: 1. Enter Left Hand Text (Our little 'ribbon' graphics are used to illustrate what element of a ribbon you are working with as you go through each Step) Step 2b: Enter Right Hand Text Step 3: Finished Length: Enter the finished (cut) length of the ribbon. 30" is the Maximum Cut Length for each piece Step 4: Enter the number of feet(100 minimum) Qty (increments of 25 ft. thereafter) (ex. 125 ft) Step 5: Enter imprint typestyle Step 6: Enter imprint color Step 7: Select 3/8" or 5/8" 3/8" 5/8" Step 8: (Optional) Add a Standard Design on 5/8 ribbon only Step 9: Enter any special Instructions When done, click the Close Window Button at the top of this window	Hint: When selecting the ribbon color, remember to ensure a contrast between the ribbon and the text. White text on a pink or ivory ribbon, for example, would be hardly readable.
		Hint: You need to complete a series of Steps to order a FAVOR style ribbon. You will need to enter the text you want on the left hand side of the ribbon (usually the couple's name, bride's name first) and, on the right hand side, the date of the wedding. Do NOT expect to get more than 35 characters on the ribbon - on average - especially if the type style you select is italacized or 'scripty'. Each capital letter takes up the same space (approximately) as two lower case letters. We AUTOMATICALLY add .5 inch as the left and right margins. Hint: The Finished (cut) length of the ribbon is the total length of the ribbon you will be using to wrap your favor. Generally, ribbon lengths of 14 - 16 inches are 'usual' and will meet most needs. To determine the actual length you need, use a piece of string to 'wrap' the favor you will be using, then measure the piece of string. In the FAVOR type of ribbon, be certain when estimating the cut length to ensure that it is long enough to not only make the wrap, but is sufficiently long enough so that your test (left and right side) can be clearly seen.